LIGHT + USB EACH SIDE
Pair of Max Reading Lights with USB and Dimming
Pair of Max Reading Lights with USB and Dimming
In stock
- Dimming built in.
- Charge at the bedhead.
- Remembers your brightness.
BUNDLE & SAVE
Won't be home? We ship to Aus Post Parcel Lockers and Post Offices.
- Australian Warranty1 year, handled locally
- Geelong-Based SupportReal people, real answers
- Same Day ShippingOrder by 3pm AEST
Pair of Max Reading Lights with USB and Dimming
Built for 12V and 24V systems
Two reading lights. Two chargers. One for each side of the bed.
A matched pair of Max reading lights with a USB-A port in each base, so both sides of the bed get light and a place to charge a phone. Push the button for on and off, hold it to dim, and it comes back at the brightness you left it.
One colour, done properly
Warm white
Warm, easy light for reading in bed without the glare.
Rated figures for the finished light. CRI shown for white modes only.
Wired in three steps
Hardwired to your 12V system. Install level 3 out of 10.
- 1
Fuse it at the battery
Fit a 3A fuse as close to the battery as you can. It protects the cable, not the light.
- 2
Run power to the light
No switch to wire in. The control is built into the light.
- 3
Mount it
Mounts with screws.
Built for life on the road
Dimming built in
Hold the button to set it bright for reading or low for winding down.
Charge at the bedhead
A USB-A port in each base charges a phone overnight.
Remembers your brightness
Comes back on at the level you last set.
Two screws each
Screws straight to a wall or bedhead panel.
1 year Australian warranty
Handled locally by our Geelong team.
Sips power. One small fuse.
Draw and fuse
| Setup | Draw | Power | Fuse |
|---|---|---|---|
| 1 light | 0.18A | 2.2W | 3A |
| Pair | 0.36A | 4.3W | 3A |
The fuse protects the wiring, not the light. Check the thinnest cable in the circuit is rated at or above the fuse.
Dimming built in
How you control it
Press the button for on and off. Hold it to dim.
It remembers
Comes back on at the brightness you last set.
Nothing else to buy
The control comes with the light, so there's no separate dimmer to fit or match.
What's in the box
Light
- Warm white
- 180 lm · ~3,200K · CRI 85
- Beam angle
- 35°
Electrical
- Voltage
- 12-24V
- Max current
- 0.18A per light (0.36A per pair)
- Max power
- 2.2W per light
- Fuse
- 3A per pair
- Dimming
- Built-in
- Memory
- Brightness only
- USB port
- USB-A
- USB output
- USB-A 10W · 5V/2A
Physical
- Dimensions
- 60 × 20 × 230mm
- Weight
- 145g each
- Mounting
- Screws
- Cable
- 300mm
Build
- Housing
- Aluminium and polycarbonate
- LED life
- 30,000 hours
- Warranty
- 1 year
Packed and dispatched from our Geelong workshop.
What owners say
Why we stock it
The bedhead pair we fit most
Most vans end up with one light over the bed and an extension lead for the phones. The Max pair puts a light and a charger on each side, so nobody has to share.
Each base has its own button with dimming and memory, so you can read while your partner sleeps.
Two screws and two wires each, and you're done.
The Campervan Builders workshopGeelong, VIC
Frequently asked questions
- Fast Australian dispatch
- 1 year Australian warranty
- Ships from Geelong
It hardwires into your 12V or 24V system. Run a fused positive and a negative to the base, then the button on the light does the rest.
Yes. The base has USB-A (USB-A 10W, 5V/2A).
Warm white 180 lumens per light. These are rated figures for the finished light.
Warm white (around 3,200K).
Push button (on/off + dimming) to dim. Set it bright for cooking, low for winding down. No extra controller to buy or wire in.
Comes back on at the brightness you last set.
A 3A fuse covers one pack. A 5A fuse covers up to 22 lights on one circuit. The fuse protects the wiring, not the light, so size it to the whole circuit and check your cable is rated for it.
0.18A (2.2W) per light at full brightness. The whole pack draws 0.36A.
Yes. It's rated for 12-24V, so it suits 12V and 24V systems.
It hardwires into your 12V system. Mounts with screws. Run positive through a fuse near the battery, then to the light.
2 × Max Wall Reading Light, 4 × Mounting screws, 1 × User manual.
Every Treklo light carries a 1 year warranty. If something's not right, get in touch and we'll sort it.
35°. A focused beam that puts light exactly where you aim it.
30,000 hours of use.
Lighting decides how your setup feels the moment the sun goes down. Good light makes packing up quicker, cooking easier and evenings at camp somewhere you actually want to sit. Every Treklo light is built to our own spec, so what you read on this page is what you get on your rig.
Pairs well with
Our commitment
At Campervan Builders, our commitment is simple: we only supply quality campervan, caravan, motorhome, and RV parts that we’ve personally tested in real off-grid conditions. From interior LED lighting to Starlink 12V conversion kits, every product is chosen for reliability, durability, and ease of installation. We back this with fast shipping Australia-wide, friendly support, and honest advice to help DIY builders and professionals alike. When you shop with us, you’re choosing proven gear that keeps you connected and comfortable on every adventure.
-
Tested for reliability
Everything we stock is tested in real Aussie off-grid conditions first.
-
Fast dispatch
Order before 3pm AEST for same-day shipping from Geelong, VIC.
-
Quality over price
We only stock products we'd use ourselves, even if they cost a bit more.