
One kit, any vehicle in the fleet
Everything to run a Starlink Mini across your utes, vans, 4WDs, tractors, mining vehicles and machinery. The Treklo shielded aluminium mount, a Plug and Play cig adapter, a 5m cable, a protective carry case and a set of four 3M adhesive discs.
The magnets grip any steel roof, bonnet or tray. On fibreglass or aluminium, fit a 3M disc once and it stays put, then the whole kit moves between vehicles as the job demands.
Online in four steps
No wiring. Plug into a 12V socket and mount up. Install level 1 out of 10.
- 1
Grab the case
Everything's packed and ready.
- 2
Mount up
Magnets on steel, or onto a 3M disc on fibreglass and aluminium.
- 3
Plug in
Cig adapter into any 12V socket, cable to the Mini.
- 4
Get online
Flick the switch and you're connected.
Built for life on the road
100kg+ magnet system
Four rubber-coated magnets, 25kg+ each.
Clear protective shield
RF-transparent, so the signal passes through while the dish stays protected.
Plug and Play cig
Any vehicle with a 12V socket is ready to go.
Steady 30V output
Holds the 30V the Mini needs as battery voltage rises and falls.
4 × 3M discs included
For canopies, camper roofs and other non-steel surfaces.
Protective case
Toss it in the back seat or hand it to whoever's heading out next.
What's in the box
- ×1Treklo Aluminium Shielded Magnet Mount with roof rack hardware
- ×1Plug and Play cig adapter (IP67 booster)
- ×15m shielded cable
- ×1Protective carry case (style varies)
- ×1Set of 4
- ×1Starlink Mini, if you add one
Your Starlink Mini (unless you add one)Not included
Mount
- Frame
- Heavy-duty aluminium, clear RF-transparent shield
- Magnets
- 4 rubber-coated, 100kg+ combined (25kg+ each)
- Mounting options
- Magnet, bolt-down or roof rack
- Size
- 315 × 275 × 60 mm
- Weight
- 1.25 kg
Power
- Output
- 30V DC, regulated
- Input
- 10–28V DC (12V or 24V systems)
- Average draw
- 22W, up to 120W peak
- Housing
- IP67 aluminium with dust cap
- Size and weight
- 80 × 30 mm, 0.25 kg
Cable
- Length
- 5m
Warranty
- Warranty
- 1 year
Packed and dispatched from our Geelong workshop.
What owners say
Why we stock it
Why fleets use it
When the Mini has to go wherever the work is, the setup can't depend on one vehicle's wiring.
This kit lives in a case. Anyone on the crew can grab it, plug it into a cig socket and be online in minutes, on a ute, a tractor or a site van. Consistent, repeatable, no auto sparky needed.
The Campervan Builders workshopGeelong, VIC
Frequently asked questions
- Fast Australian dispatch
- Field-tested for off-grid use
- Ships from Geelong

Yes. It's built for the Starlink Mini. It is not for the Gen 2 or Gen 3 dish, which have different power requirements.
Only if you choose With Starlink Mini. Otherwise the kit is built for the Mini you already own. A new Mini needs activating in the Starlink app with a Starlink plan.
Any vehicle with a 12V cig socket and a roof, bonnet or tray to mount on. Steel takes the magnets directly, and fibreglass or aluminium takes a 3M disc.
You get four. Stick a disc to a clean fibreglass or aluminium surface. It gives the magnets something to grab, so you fit it once and the mount can come and go.
That's the point. Pull the mount, unplug the adapter, pack the case and hand it over.
Yes. The magnets stick like crazy, and for a permanent setup you can bolt the mount to your roof rack.
They're rubber-coated to protect the surface. Just make sure the spot is clean before you mount up.
The power unit holds a steady 30V as your battery voltage rises and falls, so the Mini doesn't drop out or reboot when the fridge kicks in, the battery sags or you're on corrugations.
Around 22W on average, with headroom up to 120W for the Mini's peaks like booting up. At that draw a 100Ah lithium battery will run the Mini for well over a day.
Yes. The Plug and Play takes anything from 10 to 28V, so it covers 12V and 24V systems.
The Plug and Play housing is IP67 rated aluminium with a dust cap. The cig plug on the end is not waterproof, so keep that end inside the vehicle or somewhere dry.
Yes. The Plug and Play has an on/off switch on the body. Want to switch it from bed or the camp chair? Add our Starlink Mini Inline Remote.
One kit covers one vehicle at a time. If several crews need internet at once, grab a kit for each. Talk to us about fleet pricing.
Order before 3pm AEST for same day dispatch from Geelong. Free express shipping Australia wide on orders over $100. We also deliver to Aus Post parcel lockers and post offices.
1 year warranty, backed by us here in Geelong. If something goes wrong you're dealing with real people locally, not an overseas ticket queue.
Pairs well with
Our commitment
At Campervan Builders, our commitment is simple: we only supply quality campervan, caravan, motorhome, and RV parts that we’ve personally tested in real off-grid conditions. From interior LED lighting to Starlink 12V conversion kits, every product is chosen for reliability, durability, and ease of installation. We back this with fast shipping Australia-wide, friendly support, and honest advice to help DIY builders and professionals alike. When you shop with us, you’re choosing proven gear that keeps you connected and comfortable on every adventure.
-
Tested for reliability
Everything we stock is tested in real Aussie off-grid conditions first.
-
Fast dispatch
Order before 3pm AEST for same-day shipping from Geelong, VIC.
-
Quality over price
We only stock products we'd use ourselves, even if they cost a bit more.



















