Mark O
Waterproof Easy 12 Volt Starlink Mini Booster
Waterproof Easy 12 Volt Starlink Mini Booster
In stock
Regular price
$104.00
Regular price
$104.00
Sale price
Unit price
per
- Set-and-forget waterproof power for a permanent Mini install.
- Turns 9–16V into a stable 30V, even on a weak battery.
- IP68, submersible to 1.5m, with a pre-wired 10A fuse.
Input Cables
Bare has bare input tails for hardwiring. Anderson Style is ready to connect to an Anderson-style socket.
BUNDLE & SAVE
Order by 3pm AEST and it ships from Geelong
Won't be home? We ship to Aus Post Parcel Lockers and Post Offices.
- Australian Warranty1 year, handled locally
- Geelong-Based SupportReal people, real answers
- Same Day ShippingOrder by 3pm AEST
Waterproof Easy 12 Volt Starlink Mini Booster
Regular price
$104.00
Regular price
$104.00
Sale price
Unit price
per
Designed to fit Starlink Mini
Overview
Permanent waterproof power for your Starlink Mini
Hook it up to your 12V battery and your Starlink Mini runs uninterrupted. It takes 9–16V in and gives the Mini a stable 30V DC, even when the battery is low.
IP68 housing and sealed cables make it right for roof racks, boats, coastal salt spray and flood-prone installs. Not after permanent? Our Plug and Play adapters are the portable option.
9–16VDC input from 12V systems
30VStable DC output to the Mini
IP68Submersible to 1.5m
10APre-wired fuse
Setup
Online in three steps
Wire the tails to your 12V battery. Basic 12V wiring knowledge recommended. Install level 4 out of 10.
- 1
Connect to your 12V battery
Bare tails or Anderson style. Use decent size wire if you extend the cables.
- 2
Connect your Starlink cable
Plug your Starlink Mini cable into the booster.
- 3
Route it and forget it
Tidy the wiring once. It's zero maintenance after that.
Built for life on the road
IP68 sealed housing
Sealed, submersible housing for roof racks, boats and flood-prone installs.
Submersible to 1.5m
Dustproof, shockproof and submersible for exposed, wet installs.
Stable 30V output
Holds the steady 30V DC the Starlink Mini is designed to run on.
Handles weak batteries
Takes 9 to 16V in, so a tired or overcharged 12V battery still gives a steady 30V out.
Pre-wired 10A fuse
Built-in fuse protection against surges and shorts.
Hardwire-ready bare tails
Bare input tails for direct battery, Anderson or custom wiring.
Videos
See it before you buy it
Plays a muted preview on its own. Tap for sound.
TAP FOR SOUND
TAP FOR SOUND
TAP FOR SOUND
Swipe for more videos →
Specs
What's in the box
- ×1Waterproof 12V to 30V Starlink Mini Booster
You may also need
Your Starlink Mini and its original cableNot included
Your Starlink Mini and its original cableNot included
Electrical
- Voltage input
- 9–16V DC
- Voltage output
- 30V DC, stable
- Fuse
- 10A, pre-wired
- Max wattage
- 100w
Connectors
- Input
- Bare tails or Anderson style
- Input Cable
- 250 mm
- Output Cable
- 2.5 m
Physical
- Package
- 205 x 154 x 30 mm
- Unit
- 60 x 65 x 22 mm
- Weight
- 0.23 kg
Warranty
- Warranty
- 1 year
Packed and dispatched from our Geelong workshop.
Reviews
What owners say
Service (positive)Quality (positive)Product (positive)Performance (positive)Power (positive)
B
Easy to fit, seems to do its job well 👍🏼
M
Does as expected.
G
Well I only put it in my car today so I haven’t been anywhere to try it out yet but I’m pretty sure it will do the job. I’ll test it out in a few days time as I’m heading to south Australia.
D
Fantastic service, I would recommend these guys to anyone. haven't set up the product yet, but I'm confident that if it doesn't work, they will help me out.
D
Delivered in time and as described
A
Impressed with delivery speed. Ordered AM Thursday, received Friday.
A
The cable is good. The little bag of lollies was even better. Cheers.
G
I have installed it and yes there is 30v on the output but yet to connect the mini to it
C
Full time on the road with two kids... The dish stays online now overnight, which it never did before. No more resetting the dish every morning. Nothing has come loose despite the corrugations. Arrived well packed and quicker than the estimate said. Nothing else comes close.!
F
Legends.
S
Two thousand kays in and no issues. Cut my power consumption by around a third. Nothing has come loose despite the corrugations. Wired it in with the supplied leads in less than an hour. Would buy again in a heartbeat.
A
easy to set up for better performance of starlink
T
Really impressed with the build quality. Paired it with 200ah of lithium and it is faultless.
O
Honestly did not expect much. Postage to regional SA was faster than I expected. No voltage drop over the run to the roof.
I
Cannot fault it. Wiring diagram was clear enough for a non sparky. No fuss when I needed to change the delivery address. Cheers to the team for the help.
I
Brilliant bit of kit.
A
My son set it up for me. Very happy customer here.
M
Its as described , but why dont they give you a bit more wire both ends, now I have to have joins
A
Great improvement with the performance of our Starlink
Thanks for the Lollies
Cheers
Mal
E
Quality gear.
I
Went with this over the diy option. Stopped the annoying reboot loop we had every evening. Will be buying again.
L
Our voltage was dropping every night. Had a question before ordering and they came back same day. Consistent output whether the alternator is charging or not. Runs off our portable battery when we are away from the rig. Customer service answered my email within the hour. Small enough that finding a spot was easy. Would like to see a version with a display. No hesitation recommending this.
I
Nothing but good things to say. Wiring diagram was clear enough for a non sparky. The gear ships well packed which I appreciate.
L
Ordered on a whim and glad I did. Instructions were clear and actually made sense. Consistent output whether the alternator is charging or not. Would like to see a version with a display.
P
Cannot fault it. The inline fuse holder is proper automotive grade. Fits neatly in the battery box with room to spare. Cheaper to run than the generator by a mile.
F
Came recommended by the caravan club. Fixed a problem I had wrongly blamed on the dish itself. Top marks.
M
Spent weeks researching this. Runs the dish down to about 11 volts without complaint..
E
This replaced a mess of adapters... Packaging was thoughtful, nothing rattling around. Cheaper to run than the generator by a mile. Cable glands are sealed properly, no dust ingress. The polarity protection saved me when I wired it backwards. Not cheap, that is the only downside. Will be buying again.
F
Was recommended by a bloke at a campsite. Output is clean, no ripple showing on the meter. Five stars easily.
M
Perfect for what we needed. Instructions were clear and actually made sense.
S
Came recommended by the caravan club. Wiring diagram was clear enough for a non sparky. Works off the aux battery without touching the starter. Packaging was thoughtful, nothing rattling around.
C
Perfect for what we needed. Instructions were clear and actually made sense. Packaging was thoughtful, nothing rattling around.
P
Easy transaction, well packaged, and prompt delivery!
Lollies were a nice addition 😋
Why we stock it
Why we rate this one
We fit a lot of Starlink Minis in the workshop. This is the no-frills booster. No remote, no switch, no settings. Two wires to the battery and it runs for years.
Steady 30V. Starlink spec the Mini at 30V. This takes 9 to 16V off the house battery and holds 30V through the sags and solar overcharge that drop cheap cig plugs out. Customers run it down to about 11V without complaint.
Built to be left alone. IP68, submersible to 1.5m, dustproof, shockproof, UV-resistant cable, 10A fuse already in line. Roof racks, boats, open trays. Once it's in, you don't touch it again.
Two wires and done. Red to positive, black to negative. Choose Anderson if you want it plug-in, or run it straight to the battery box. The 2.5m Starlink lead is in the box.
The budget unit that actually holds up. Plenty of boosters on the market use this exact same shell. They are not the same inside. We've had the others on the bench and this is the one we put on customer vans.
Don't take our word for it. Check the reviews.
The Campervan Builders workshopGeelong, VIC
See it in use
Real Setups
Bill E
Got a setup shot?
Got a shot of yours in action? Send it over and we'll shout you a six-pack as a thanks.
Send yours
Swipe to see the setups
Support
Frequently asked questions
Ready to gear up?
- Fast Australian dispatch
- Field-tested for off-grid use
- Ships from Geelong
Yes. It's built for the Starlink Mini. It is not for the Gen 2 or Gen 3 dish, which have different power requirements.
Order before 3pm AEST for same day dispatch from Geelong. Free express shipping Australia wide on orders over $100. We also deliver to Aus Post parcel lockers and post offices.
Permanent. It's built to be wired in once and left alone. For a portable setup, our Plug and Play adapters plug into a cig or Anderson socket instead.
Yes. Use decent size wire to keep voltage drop down. Basic 12V wiring knowledge is recommended if you're extending cables or adding connectors.
No. It takes 9–16V, so it's made for 12V systems. For 24V, the Plug and Play adapters (10–28V) or the TREKLO K2 suit.
Connect the bare input tails to your 12V battery, add an Anderson plug, or extend them to suit your setup. Then plug in your Starlink Mini cable and route the wiring tidily. Basic 12V wiring knowledge is recommended.
Very. The housing is IP68 rated with sealed cables, and it's dustproof, shockproof and submersible to 1.5m. It's built for roof racks, boats and flood-prone installs.
Yes. The 9–16V input range handles weak or overcharged 12V batteries and solar systems where voltage moves around, and it still holds a stable 30V to the Mini.
Yes. A 10A fuse comes pre-wired to protect against surges and shorts.
No. You connect your existing Starlink Mini cable to the booster's output.
No. Once it's wired in and the cables are routed properly, it's set and forget.
No. It runs your Starlink Mini straight from DC, so you skip the 240V inverter and the power it wastes.
1 year warranty, backed by us here in Geelong. If something goes wrong you're dealing with real people locally, not an overseas ticket queue.
Shop the Alternatives
OEM INSTALL KIT
Portable
Wireless Switch
Why buy from us
Our commitment
At Campervan Builders, our commitment is simple: we only supply quality campervan, caravan, motorhome, and RV parts that we’ve personally tested in real off-grid conditions. From interior LED lighting to Starlink 12V conversion kits, every product is chosen for reliability, durability, and ease of installation. We back this with fast shipping Australia-wide, friendly support, and honest advice to help DIY builders and professionals alike. When you shop with us, you’re choosing proven gear that keeps you connected and comfortable on every adventure.
-
Tested for reliability
Everything we stock is tested in real Aussie off-grid conditions first.
-
Fast dispatch
Order before 3pm AEST for same-day shipping from Geelong, VIC.
-
Quality over price
We only stock products we'd use ourselves, even if they cost a bit more.