NO 1 BEST SELLING SL POWER SUPPLY
12v Starlink Mini Boosted Plug and Play IP67
12v Starlink Mini Boosted Plug and Play IP67
Run your Starlink Mini straight off a 12V socket.
Boosts to the steady 30V the Mini needs.
Stops dropouts, Used by thousands of Aussies.
SKU:sl-cig-mini-pp
In stock
Your Starlink Mini came with a 15m cable that plugs straight into this unit. Only add a cable if you want a shorter, tidier run.
BUNDLE & SAVE
12v Starlink Mini Boosted Plug and Play IP67
๐ The Ultimate Power Upgrade for Your Starlink Mini
Power your Starlink Mini straight from a 12V cigarette socket. This plug and play adapter boosts 10-28V input to the exact 30V Starlink recommends, so you get fast, stable internet on the road without dropouts, guesswork or an inverter. Used by thousands of Aussies in campervans, caravans, boats, trucks and utes ๐กโก
๐ง How It Works
Plug into your vehicle's 12V socket, connect the original 15m Starlink Mini cable (it pulls straight out of the AC power brick), flick the switch and you're online. Field-tested with the full 15m cable length. Want a tidier run? We stock shorter cables too.
๐ Key Features
- IP67 waterproof anodised aluminium housing with dust cap (cig plug end stays dry inside the vehicle)
- Smart voltage boosting: 10-28V in, stable 30V out, handles power swings and rough rides
- Polarity, under/over voltage and heat protection
- On/off switch to power down or reboot in seconds, no unplugging
- High-purity copper pins for maximum conductivity and cooler running
- Stainless steel mounting bracket and screws included for permanent installs
๐ฆ What's in the Box
- 1x IP67 Waterproof 12V Power Supply for Starlink Mini (cig plug itself is not waterproof)
- 1x Dust Cap
- 1x Stainless Steel Mounting Bracket + Screws
๐ Starlink Mini's original cable is required but not included.
๐ Same-Day Dispatch
Order before 3pm AEST and it ships same day from Geelong. Get online by tomorrow.

Buy as a combo
Why The Treklo Plug and Play
|
Treklo Plug and Play
|
Simple Plug-in Cables
|
Generic Power Supplies
|
Starlink's Own 12V Adapter
|
|
|---|---|---|---|---|
| Material Type | โ Anodised Aluminium | Plastic / PVC | Plastic / Alloys | Plastic |
| Voltage Output | โ Stable 30V | โ 12V only | Varies | 20V |
| Voltage Boosting | โ 0-28V in, 30V out | โ None | Varies | 20V |
| Cable Length Supported | โ Up to 15m (Original Cable) | โ 3M | Varies | 5M |
| Protection | โ Polarity, Under/Over Volt, Heat | โ Minimal | Sometimes | โ Low |
| Waterproof | โ IP67 Rated | Splash Only | Varies | โ No |
| Install | โ True Plug and Play | Plug and Play | โ Wiring Often Required | Plug and Play |
| Aus Support and Warranty | โ Geelong-Based, Warranted. | Questionable | โ Sometimes | Overseas Brand |
Treklo product videos: an auto-playing hero with branded video selectors.

Real Setups
1
Perfect Power Supply
Designed by following the expert engineers at Starlink themselves, We have designed this 12/24 Volt adapter to run at 30volts exactly the same specs as what starlink recommends.
2
Easy, Simple Install
We believe getting your Starlink powered on 12V/24v.. whether in your car, caravan, boat, truck, or machinery it should be simple. Thatโs exactly what this adapter offers: effortless, plug-and-play convenience.
1
2
3
4
3
Tested Performance
Weโve done the research and testing. This is the best solution. Compact, efficient, and designed to save battery power. Simple and effective.
4
Trusted Reliability
With a 10-28V input range, this adapter keeps your Starlink online and performing flawlessly, no matter your battery's state of charge. Reliable, robust, and ready for any adventure!
Frequently asked questions
- Fast Australian dispatch
- Field-tested for off-grid use
- Easy returns

Yes. It's purpose-built for the Starlink Mini and outputs exactly 30V, the same spec Starlink recommends. No tinkering or guesswork, just plug it in and you're online. It is not for the Gen 2 or Gen 3 dish, which have different power requirements.
No. (unless you choose it) You use the original 15m cable that came with your Starlink Mini, it just pulls out of the AC power brick and plugs in here. We've field-tested this adapter with the full 15m length so there are no compatibility doubts. Want a tidier run? We stock shorter replacement cables from 0.2m up.
No. The boosting is built in. As your battery voltage rises and falls through the day, the adapter holds a steady 30V to your Mini, so you don't get the under-voltage dropouts that plague straight 12V setups.
It draws around 22W on average, with headroom up to 120W for the Mini's peak demands like booting up or heavy weather. That's a fraction of what an inverter setup wastes doing the same job.
No. It only draws what the Mini needs, and the on/off switch cuts power in seconds without unplugging anything. At roughly 22W average, a 100Ah lithium battery will run a Starlink Mini for well over a day. AGM batteries won't stretch as far since you can only safely use around half their capacity, so expect noticeably less runtime.
The power supply itself is rated IP67 and comes with a dust cap to seal it when not in use. (Cables are also sealed when in use) Worth noting the cigarette plug on the end is not waterproof, so keep that side inside the vehicle or somewhere dry.
There's no install as such. Plug it into your 12V socket, connect your Starlink Mini cable, flick the switch and go. No tools needed. If you want it mounted permanently, a stainless steel bracket and screws are included.
Yes. If your power station or battery box has a 12V cigarette socket, this plugs straight in, making it an easy portable Starlink setup for camping, worksites or emergencies.
Yes. The 10 to 28V input range handles the voltage swing you get while the alternator is charging, so the Mini stays online on the move.
This version is built around the cig plug for true plug-and-play use. If you want a permanent wired install, go for the Anderson plug version of this unit, or step up to the K2 Pro for a fully mounted setup with wireless remote switching.
This unit has a manual switch on the body. If you want to switch Starlink from bed or the camp chair, add our Starlink Mini Inline Remote, or look at the K2 Pro which includes two wireless key fobs out of the box.
This is the simplest way to get boosted 30V power to your Mini: plug into a cig socket and go, $116. The K2 Pro is the step up for permanent installs, with Anderson and cig inputs, wireless remote on/off from up to 25m, and a mounted aluminium housing. Same stable 30V output either way.
1 year warranty, backed by us here in Geelong. If something goes wrong you're dealing with real people locally, not an overseas ticket queue.
Order before 3pm AEST for same day dispatch from Geelong. Free express shipping Australia wide on orders over $100, so this unit always ships free. We also deliver to Aus Post parcel lockers and post offices.
Our Commitment
At Campervan Builders, our commitment is simple: we only supply quality campervan, caravan, motorhome, and RV parts that weโve personally tested in real off-grid conditions. From interior LED lighting to Starlink 12V conversion kits, every product is chosen for reliability, durability, and ease of installation. We back this with fast shipping Australia-wide, friendly support, and honest advice to help DIY builders and professionals alike. When you shop with us, youโre choosing proven gear that keeps you connected and comfortable on every adventure.



















