📝 Starlink Gen 2 Plug and Play 12V Conversion Kit

Run your Starlink Gen 2 dish directly from 12V or 24V DC and ditch the bulky inverter and stock router. This plug and play DC kit is built for caravans, campervans, RVs, boats and off-grid setups where efficiency and simplicity actually matter. Just connect to your battery system, plug in your Gen 2 dish and included router, and enjoy fast, stable internet with significantly lower power consumption.

⭐ Essential Benefits

• True plug and play – no wire cutting, no firmware hacks, no Starlink warranty risk.
• DC powered efficiency – avoid inverter losses and save up to 30% power vs AC setups.
• All-in-one unit – 12/24V–48V converter, PoE injector and 12V regulator in one compact box.
• Router included – comes with TP-LINK AX55 WiFi 6 router for fast, reliable Wi-Fi.
• Versatile power options – run from 12V or 24V battery systems or suitable power stations.
• Built for mobile/off-grid – ideal for caravans, 4WDs, RVs, boats and remote sites.
• Safe and protected – integrated fuses, power switch and status indicator for peace of mind.

⚙️ Functionality

This kit converts a 12V or 24V DC input into two clean DC outputs:
• 48V PoE to power your Starlink Gen 2 dish via the included SPX-to-RJ45 adapter.
• Regulated 12V output to power the included third-party router directly, avoiding extra AC/DC bricks and wasted energy.

Simply wire the DC conversion unit to your battery or DC distribution (using the supplied M8 O-ring to Anderson lead or your own wiring), connect the Starlink cable and RJ45 patch lead, and you’re online. No cutting the Starlink cable, no modifying the dish, and no external inverters required.

🔌 Compatibility

• Starlink Gen 2 dish (rectangular “standard” dish)
• 12V or 24V battery systems (AGM, lithium, etc.)
• Included TP-LINK AX55 WiFi 6 router (or other 12V DC routers using the DC5521 lead)
• Ideal for caravans, campervans, 4WDs, RVs, boats and off-grid cabins

🧰 Installation Difficulty

🟡 3/5 (Moderate) – requires basic 12/24V wiring knowledge and correct polarity; no Starlink cable cutting or internal modification needed.

🔍 Features

• Integrated 12/24V–48V DC converter for Starlink PoE
• Regulated 12V DC output for third-party router
• SPX (Starlink) to RJ45 adapter lead for Gen 2 proprietary connector
• Significantly reduced power loss vs inverter + AC router setups
• Power switch and LED indicator on the DC unit
• Built-in fuses for overload and short-circuit protection
• Compact, enclosed housing for mobile and off-grid environments
• Supports snow-melt mode (extra ~120W draw when enabled – requires adequate supply)

📊 Specifications

📦 What’s Included

• 1 × DC Conversion Unit (12/24V–48V PoE + 12V regulator)
• 1 × M8 O-Ring to Anderson Power Cable
• 1 × DC5521 Male to DC5521 Male Power Cable (for 12V router)
• 1 × RJ45 to RJ45 Ethernet Cable (router connection)
• 1 × SPX (Starlink) to RJ45 Adapter Cable (for Gen 2 dish)
• 1 × TP-LINK AX55 WiFi 6 Router (2.4GHz 574Mbps / 5GHz 2402Mbps)

💡 Consider Pairing with:

For a more secure and streamlined installation, consider adding the CAT6 Starlink Caravan/Campervan Waterproof Wall Socket. This accessory allows you to easily route your Starlink cables through your vehicle’s walls while keeping the connections protected from the elements.

If you are looking for the Gen 3 Plug and Play 12V Kit, click here.

NOTE: This is the 12v Kit only. Starlink and battery are not included.