3 WHITES + BLUE
Treklo Tri Colour Surface Light (2 Pack)
Treklo Tri Colour Surface Light (2 Pack)
In stock
- Three whites plus blue.
- Built-in dimmer.
- Bright for its size.
BUNDLE & SAVE
Won't be home? We ship to Aus Post Parcel Lockers and Post Offices.
- Australian Warranty1 year, handled locally
- Geelong-Based SupportReal people, real answers
- Same Day ShippingOrder by 3pm AEST
Treklo Tri Colour Surface Light (2 Pack)
Built for 12V systems
Warm, neutral, cool or blue. You choose.
Two surface lights that do it all. Switch between warm, neutral and cool white to suit the moment, or blue for a nightlight glow. Press and hold to dim, and they remember brightness and colour.
4 ways to light it
Warm white
The resort feel. Soft on the eyes and easy to relax under.
Neutral white
The everyday white. Clear enough to cook by, soft enough to live under.
Bright white
Crisp, clean light for jobs. True colours, readable labels, no guessing.
Blue
A soft nightlight glow you can leave on without lighting the place up.
Rated figures for the finished light. CRI shown for white modes only.
Wired in three steps
Hardwired to your 12V system. Install level 3 out of 10.
- 1
Fuse it at the battery
Fit a 3A fuse as close to the battery as you can. It protects the cable, not the light.
- 2
Run power to the light
No switch to wire in. The control is built into the light.
- 3
Mount it
Mounts with screws.
Built for life on the road
Three whites plus blue
Warm for evenings, neutral for everyday, cool for jobs, blue for night.
Built-in dimmer
Press and hold to dim.
Bright for its size
Strong output from a 120mm light.
Remembers your setting
Brightness and colour come back how you left them.
1 year Australian warranty
Handled locally by our Geelong team.
Sips power. One small fuse.
Draw and fuse
| Setup | Draw | Power | Fuse |
|---|---|---|---|
| 1 light | 0.33A | 4.0W | 3A |
| Pack of 2 | 0.66A | 7.9W | 3A |
The fuse protects the wiring, not the light. Check the thinnest cable in the circuit is rated at or above the fuse.
Dimming built in
How you control it
Press and hold to dim. Set it bright for cooking, low for winding down. No extra controller to buy or wire in.
It remembers
Switch it off at the isolator and it comes back exactly how you left it, brightness and colour.
Nothing else to buy
The control comes with the light, so there's no separate dimmer to fit or match.
What's in the box
Light
- Warm white
- 400 lm · ~3,000K · CRI 85+
- Neutral white
- 400 lm · ~4,500K · CRI 85+
- Bright white
- 400 lm · ~6,000K · CRI 85+
- Blue
- 30 lm
- Beam angle
- 270°
Electrical
- Voltage
- 12V
- Max current
- 0.33A per light (0.66A per pack)
- Max power
- 4.0W per light
- Fuse
- 3A per pack
- Dimming
- Built-in
- Memory
- Brightness and colour
Physical
- Dimensions
- 120 × 12mm
- Weight
- 65g each
- Mounting
- Screws
- Cable
- 170mm bare ends
Build
- Housing
- Aluminium, Plastic and Polycarbonate
- Warranty
- 1 year
Packed and dispatched from our Geelong workshop.
What owners say
Why we stock it
Every white, plus blue
Warm for evenings, neutral for everyday, cool for jobs and blue for a nightlight. One light that changes with what you're doing.
Press and hold to dim, and it remembers brightness and colour.
Two screws and two wires each.
The Campervan Builders workshopGeelong, VIC
Frequently asked questions
- Fast Australian dispatch
- 1 year Australian warranty
- Ships from Geelong
Press to step through warm, neutral, cool and blue. Press and hold to dim.
Warm white 400 lumens, neutral white 400 lumens, bright white 400 lumens, blue 30 lumens per light. These are rated figures for the finished light.
Warm white (around 3,000K), Neutral white (around 4,500K), Bright white (around 6,000K), Blue.
Press and hold to dim. Set it bright for cooking, low for winding down. No extra controller to buy or wire in.
Switch it off at the isolator and it comes back exactly how you left it, brightness and colour.
A 3A fuse covers one pack. A 5A fuse covers up to 12 lights on one circuit. The fuse protects the wiring, not the light, so size it to the whole circuit and check your cable is rated for it.
0.33A (4.0W) per light at full brightness. The whole pack draws 0.66A.
It's rated for 12V, so it's made for 12V systems. Don't run it on 24V.
It's built for inside the vehicle, canopy or van. For outside, look at our exterior range, which is weather sealed.
It hardwires into your 12V system. Mounts with screws. Run positive through a fuse near the battery, then to the light.
2 × Tri colour surface lights, 1 × Quick install guide.
Every Treklo light carries a 1 year warranty. If something's not right, get in touch and we'll sort it.
270°. A wide spread that fills the space instead of making a hot spot.
Lighting decides how your setup feels the moment the sun goes down. Good light makes packing up quicker, cooking easier and evenings at camp somewhere you actually want to sit. Every Treklo light is built to our own spec, so what you read on this page is what you get on your rig.
Pairs well with
Our commitment
At Campervan Builders, our commitment is simple: we only supply quality campervan, caravan, motorhome, and RV parts that we’ve personally tested in real off-grid conditions. From interior LED lighting to Starlink 12V conversion kits, every product is chosen for reliability, durability, and ease of installation. We back this with fast shipping Australia-wide, friendly support, and honest advice to help DIY builders and professionals alike. When you shop with us, you’re choosing proven gear that keeps you connected and comfortable on every adventure.
-
Tested for reliability
Everything we stock is tested in real Aussie off-grid conditions first.
-
Fast dispatch
Order before 3pm AEST for same-day shipping from Geelong, VIC.
-
Quality over price
We only stock products we'd use ourselves, even if they cost a bit more.