THE ANDO VERSION OF OUR BEST SELLER
12v Starlink Mini Boosted Plug and Play Anderson Plug IP67
12v Starlink Mini Boosted Plug and Play Anderson Plug IP67
Run your Starlink Mini straight off a Ando plug.
Boosts to the steady 30V the Mini needs.
Stops dropouts, Used by thousands of Aussies.
SKU:sl-ando-mini-pp
In stock
BUNDLE & SAVE
12v Starlink Mini Boosted Plug and Play Anderson Plug IP67
The Ultimate Anderson-Style Adapter for Starlink Mini
Now waterproof. Now heavy-duty. Now built for the wild.
Say goodbye to flimsy connections and underpowered setups. This Anderson-style plug power adapter for Starlink Mini is built with rugged performance, IP67 waterproof protection, and precise 30v DC output engineered for reliable use in tough environments.
Built for caravans, campervans, RVs, boats, 4WDs, and off-grid setups, this adapter helps keep your Starlink Mini online anywhere you go.
⚙️ Functionality
Plug the adapter into your Anderson-style socket, connect the original 15m Starlink Mini cable, and you’re ready to go. No adapters, no rewiring, and no hassle.
The adapter takes power from your 12v setup and uses smart voltage boosting to convert fluctuating 10–28v DC input into a stable 30v DC output for Starlink Mini. It has been tested with the original 15m Starlink Mini cable for reliable performance in campervan, caravan, marine, and off-grid setups.
🔍 Key features
• Anderson-style plug input – connects directly to your Anderson-style socket setup.
• Stable 30v output – delivers regulated power for Starlink Mini operation.
• Smart voltage boosting – handles fluctuating 10–28v DC input and outputs stable 30v DC.
• Inline safety built in – includes a pre-installed 10A blade fuse for overcurrent protection.
• IP67 waterproof design – sealed anodised aluminium housing with dust cap for outdoor durability.
• Heavy-duty aluminium body – built for corrosion resistance, durability, and heat dissipation.
• High-purity copper pins – supports strong conductivity and reduced heat build-up under load.
• Mounting hardware included – stainless steel mounting bracket and screws supplied for permanent installs.
• Field-tested reliability – tested with 15m Starlink Mini cables in off-grid environments.
📦 What’s included
• 1 × Anderson-style power adapter for Starlink Mini
• 1 × dust cap
• 1 × stainless steel mounting bracket
• Mounting screws
🔄 Important note
The original Starlink Mini cable is required and is not included.

Buy as a combo
Why The Treklo Plug and Play
|
Treklo Plug and Play
|
Simple Plug-in Cables
|
Generic Power Supplies
|
Starlink's Own 12V Adapter
|
|
|---|---|---|---|---|
| Material Type | ✓ Anodised Aluminium | Plastic / PVC | Plastic / Alloys | Plastic |
| Voltage Output | ✓ Stable 30V | ✗ 12V only | Varies | 20V |
| Voltage Boosting | ✓ 0-28V in, 30V out | ✗ None | Varies | 20V |
| Cable Length Supported | ✓ Up to 15m (Original Cable) | ✗ 3M | Varies | 5M |
| Protection | ✓ Polarity, Under/Over Volt, Heat | ✗ Minimal | Sometimes | ✗ Low |
| Waterproof | ✓ IP67 Rated | Splash Only | Varies | ✗ No |
| Install | ✓ True Plug and Play | Plug and Play | ✗ Wiring Often Required | Plug and Play |
| Aus Support and Warranty | ✓ Geelong-Based, Warranted. | Questionable | ✗ Sometimes | Overseas Brand |
Treklo product videos: an auto-playing hero with branded video selectors.

Real Setups
Frequently asked questions
- Fast Australian dispatch
- Field-tested for off-grid use
- Easy returns

Yes. It's purpose-built for the Starlink Mini and outputs exactly 30V, the same spec Starlink recommends. No tinkering or guesswork, just plug it in and you're online. It is not for the Gen 2 or Gen 3 dish, which have different power requirements.
No. (unless you choose it) You use the original 15m cable that came with your Starlink Mini, it just pulls out of the AC power brick and plugs in here. We've field-tested this adapter with the full 15m length so there are no compatibility doubts. Want a tidier run? We stock shorter replacement cables from 0.2m up.
No. The boosting is built in. As your battery voltage rises and falls through the day, the adapter holds a steady 30V to your Mini, so you don't get the under-voltage dropouts that plague straight 12V setups.
It draws around 22W on average, with headroom up to 120W for the Mini's peak demands like booting up or heavy weather. That's a fraction of what an inverter setup wastes doing the same job.
No. It only draws what the Mini needs, and the on/off switch cuts power in seconds without unplugging anything. At roughly 22W average, a 100Ah lithium battery will run a Starlink Mini for well over a day. AGM batteries won't stretch as far since you can only safely use around half their capacity, so expect noticeably less runtime.
The power supply itself is rated IP67 and comes with a dust cap to seal it when not in use. (Cables are also sealed when in use) Worth noting the anderson style on the end is not waterproof, so keep that side inside the vehicle or somewhere dry.
There's no install as such. Plug it into your ando socket, connect your Starlink Mini cable. No tools needed. If you want it mounted permanently, a stainless steel bracket and screws are included.
Yes. If your power station or battery box has a anderson style plug, this plugs straight in, making it an easy portable Starlink setup for camping, worksites or emergencies.
Yes. The 10 to 28V input range handles the voltage swing you get while the alternator is charging, so the Mini stays online on the move.
Yep the Anderson plug version of this unit is great for permanent installs, or step up to the K2 Pro for a fully mounted setup with wireless remote switching.
No, If you want to switch Starlink from bed or the camp chair, add our Starlink Mini Inline Remote, or look at the K2 Pro which includes two wireless key fobs out of the box.
This is the simplest way to get boosted 30V power to your Mini: plug into a andosocket and go, $116. The K2 Pro is the step up for permanent installs, with Anderson and cig inputs, wireless remote on/off from up to 25m, and a mounted aluminium housing. Same stable 30V output either way.
1 year warranty, backed by us here in Geelong. If something goes wrong you're dealing with real people locally, not an overseas ticket queue.
Order before 3pm AEST for same day dispatch from Geelong. Free express shipping Australia wide on orders over $100, so this unit always ships free. We also deliver to Aus Post parcel lockers and post offices.
Our Commitment
At Campervan Builders, our commitment is simple: we only supply quality campervan, caravan, motorhome, and RV parts that we’ve personally tested in real off-grid conditions. From interior LED lighting to Starlink 12V conversion kits, every product is chosen for reliability, durability, and ease of installation. We back this with fast shipping Australia-wide, friendly support, and honest advice to help DIY builders and professionals alike. When you shop with us, you’re choosing proven gear that keeps you connected and comfortable on every adventure.



















