
100W USB-C power for your Mini, straight from 12V
Plug it into a standard 12V cigarette socket and the main USB-C PD3.1 port delivers the 100W (20V/5A) your Starlink Mini needs. No 24V conversion, no inverter.
A second USB-C and a USB-A port charge phones and accessories, with 165W combined across all three. Metal housing with built-in heat dissipation for continuous use.
Online in three steps
Plugs into a 12V cig socket. No permanent wiring. Install level 1 out of 10.
- 1
Plug into a 12V socket
Any standard cigarette socket. No wiring.
- 2
Connect a USB-C to DC cable
It needs a PD20V 100W chip to power the Mini.
- 3
Charge the rest
Use the second USB-C and USB-A for phones and accessories.
Built for life on the road
140W PD3.1 USB-C
Main port gives the Mini the 100W (20V/5A) it needs, with headroom for laptops.
Three ports
Second USB-C and a USB-A port charge phones and accessories too.
Built for continuous load
Metal housing with integrated heat dissipation.
Cig socket plug
Plugs into any standard cigarette-style socket. No wiring.
True Power
While this casing (shell) is very generic, our components / internals are not.
See it before you buy it
What's in the box
- ×1140W USB-C cigarette port power adapter
A Starlink Mini USB-C to DC cable with a PD20V 100W chipNot included
Electrical
- Voltage input
- 12V / 24V DC
- Total output
- 165W combined
- USB-C1
- PD3.1 up to 140W, 20V/5A, 28V/5A
- USB-C2
- Up to 30W
- USB-A
- Up to 30W, QC compatible
Physical
- Dimensions
- Approx 83 × 43 mm
- Weight
- 0.075 kg
- Housing
- Aluminium - integrated heat dissipation
Connectors
- Mounting
- Cigarette port plug-in
Warranty
- Warranty
- 1 year
Packed and dispatched from our Geelong workshop.
What owners say
Why we stock it
Why we rate this one
This isn't a typical car charger. It holds the 100W a Mini needs, from plain 12V.
It's built for continuous high load, not a quick phone top-up. The main USB-C port puts out up to 140W, so it runs a Starlink Mini or a laptop without breaking a sweat, and the other two ports fast-charge your phone, drone batteries and the rest off the same socket. Add our USB-C to DC cable and your Mini is sorted.
We tried a lot of units before this one. None of them held up. Some even looked the part, then quietly throttled back to less power and lower voltage once they were under load. So we had this one built to our own specs and standards. That's why we back it, and why it just works. If you've already been through the car adapter sold by the people who make the dish, you'll know the constant failures we mean. This one doesn't do that.
You'll be impressed by what you get for the money. Line it up against what the servo or the big retailers sell for similar and it isn't close.
Know the limits. If all you want is to power a Starlink Mini, our Plug and Play adapters are the better buy. They're more efficient, they're IP67 with an on/off switch, you can run pretty much any length of cable. They also don't have the limitations of USB-C. But if you're dead set on USB-C, this is the one.
The Campervan Builders workshopGeelong, VIC
Real Setups
Frequently asked questions
- Fast Australian dispatch
- Field-tested for off-grid use
- Ships from Geelong

Yes. It's built for the Starlink Mini. It is not for the Gen 2 or Gen 3 dish, which have different power requirements.
Order before 3pm AEST for same day dispatch from Geelong. Free express shipping Australia wide on orders over $100. We also deliver to Aus Post parcel lockers and post offices.
A USB-C to DC cable with a PD20V 100W chip. Generic USB-C cables don't have it and won't power the Mini properly. We stock the right cable in 2m, 3m, 5m and 10m.
It's made for 12V DC systems but will work on 24v as well. That's the point of it: the full 100W the Mini needs straight from a 12V socket, no 24V conversion required.
Yes. The second USB-C and the USB-A port fast-charge phones and accessories. 165W is the combined maximum across all ports, and each port's limit is set by the load and what the device asks for. Note, you sure plug your other devices in before Starlink.
Yes. The main USB-C port is PD3.1 with up to 140W (including 20V/5A), which covers the 100W the Mini needs straight from a 12V socket.
USB-C1, the main high-power port. Use the second USB-C and the USB-A port for phones and accessories.
Yes. The main port suits high-demand USB-C devices such as a MacBook Pro or other USB-C laptops.
No. It plugs straight into a standard 12V cigarette socket.
It has a metal housing with built-in heat dissipation and is designed for continuous high-load use.
1 year warranty, backed by us here in Geelong. If something goes wrong you're dealing with real people locally, not an overseas ticket queue.
Consider this
Our commitment
At Campervan Builders, our commitment is simple: we only supply quality campervan, caravan, motorhome, and RV parts that we’ve personally tested in real off-grid conditions. From interior LED lighting to Starlink 12V conversion kits, every product is chosen for reliability, durability, and ease of installation. We back this with fast shipping Australia-wide, friendly support, and honest advice to help DIY builders and professionals alike. When you shop with us, you’re choosing proven gear that keeps you connected and comfortable on every adventure.
-
Tested for reliability
Everything we stock is tested in real Aussie off-grid conditions first.
-
Fast dispatch
Order before 3pm AEST for same-day shipping from Geelong, VIC.
-
Quality over price
We only stock products we'd use ourselves, even if they cost a bit more.



















