NO-DRILL INSTALL
Treklo - EmberLux Rigid LED Strip Light
Treklo - EmberLux Rigid LED Strip Light
In stock
- Peel, stick, done.
- Warm by design.
- Remembers your setting.
BUNDLE & SAVE
Won't be home? We ship to Aus Post Parcel Lockers and Post Offices.
- Australian Warranty1 year, handled locally
- Geelong-Based SupportReal people, real answers
- Same Day ShippingOrder by 3pm AEST
Treklo - EmberLux Rigid LED Strip Light
Built for 12V systems
Warm evenings, without the drill.
EmberLux comes with 3M adhesive backing already applied, so you can peel and stick it in minutes, or bolt it through with the hardware in the box. Pick bright white for jobs, amber for bug-free nights, or both together for a warm glow that makes camp feel like home.
3 ways to light it
Bright white
Est.Crisp, clean light for jobs. True colours, readable labels, no guessing.
Warm blend
Est.White and amber together. Brighter than amber, softer than full white.
Amber
Est.The bug light. Far fewer insects come to the party, and it's easy on the neighbours.
Lumens measured on the finished light at 12V, not the LED chip rating. CRI shown for white modes only. Figures marked as estimates are scaled from a tested size.
Wired in three steps
Hardwired to your 12V system. Install level 2 out of 10.
- 1
Fuse it at the battery
Fit a 3A fuse as close to the battery as you can. It protects the cable, not the light.
- 2
Run power to the light
No switch to wire in. The control is built into the light.
- 3
Mount it
Mounts with screws or adhesive.
Built for life on the road
Peel, stick, done
Pre-applied 3M adhesive means no drilling on the first fit. Bolts are in the box if you want both.
Warm by design
Bright white, amber, or both on for a warm blend that's easy on the eyes.
Remembers your setting
Brightness and colour come back exactly how you left them.
Wide, even light
A 180° beam spreads light across the whole space instead of a hot spot.
IP65 rated
Sealed for rain, dust and wash-downs.
1 year Australian warranty
Handled locally by our Geelong team.
Sips power. One small fuse.
By size
| Size | Draw | Power | Fuse |
|---|---|---|---|
| 32cm | 0.27A | 3.2W | 3A |
| 64cm | 0.6A | 7.2W | 3A |
| 96cm | 0.94A | 11.3W | 3A |
The fuse protects the wiring, not the light. Check the thinnest cable in the circuit is rated at or above the fuse.
Dimming built in
How you control it
Press and hold to dim. Set it bright for cooking, low for winding down. No extra controller to buy or wire in.
It remembers
Switch it off at the isolator and it comes back exactly how you left it, brightness and colour.
Nothing else to buy
The control comes with the light, so there's no separate dimmer to fit or match.
What's in the box
Light
- Bright white
- 185 lm · ~4,800K · CRI 86
- Warm blend
- 125 lm · ~3,400K · CRI 67
- Amber
- 48 lm · ~1,600K
- Beam angle
- 180°
Electrical
- Voltage
- 12V
- Max current
- 0.6A per light
- Max power
- 7.2W per light
- Fuse
- 3A
- Dimming
- Built-in
- Memory
- Brightness and colour
Physical
- Dimensions
- 690 × 20 × 16mm
- Weight
- 190g
- Mounting
- Screws, Adhesive
- Cable
- 3m cable with 5521 connector and bare end
Build
- Housing
- Aluminium Housing with Polycarbonate Lens
- Weather rating
- IP65
- Warranty
- 1 year
Packed and dispatched from our Geelong workshop.
What owners say
Why we stock it
Fit it in five minutes, no drill
Not everyone wants to drill their canopy or awning rail. EmberLux comes with 3M adhesive already on the back, so it can go up clean and come off later. It's our pick for renters, hire rigs and anyone trying it before committing.
The warm blend mode is the star. It's the relaxed light that makes camp feel like somewhere you want to sit, and amber is there for the bug-heavy nights.
Bolts are in the box too, for corrugations and anything that flexes.
The Campervan Builders workshopGeelong, VIC
Frequently asked questions
- Fast Australian dispatch
- Tested as a finished light
- Ships from Geelong
All three are rigid aluminium strips with a built-in dimmer and memory. Softglow does bright white, amber and red, and is the one to pick if you want a night vision mode. ClearMax does bright white and amber plus a blended warm mode, with the highest colour accuracy of the three. EmberLux does bright white, amber and a blended warm mode, and comes with 3M adhesive backing already applied so it can go up without drilling.
It holds on clean, smooth, dry surfaces. For corrugations, heat or anything that flexes, use the bolts as well. Clean with isopropyl first and press firmly for 30 seconds.
Bright white 95 / 185 / 280, warm blend 68 / 125 / 185, amber 27 / 48 / 70 lumens on the 32cm / 64cm / 96cm. Measured on the finished light at 12V, not the LED chip rating, so it's the light you actually get.
Bright white (around 4,800K), Warm blend (around 3,400K), Amber (around 1,600K).
Press and hold to dim. Set it bright for cooking, low for winding down. No extra controller to buy or wire in.
Switch it off at the isolator and it comes back exactly how you left it, brightness and colour.
A 3A fuse covers one light. A 5A fuse covers up to 6 lights on one circuit. The fuse protects the wiring, not the light, so size it to the whole circuit and check your cable is rated for it.
0.27A on the 32cm, 0.6A on the 64cm, 0.94A on the 96cm at full brightness.
It's rated for 12V, so it's made for 12V systems. Don't run it on 24V.
It's rated IP65, so it's sealed against dust and water, including rain.
It hardwires into your 12V system. Mounts with screws or adhesive. Run positive through a fuse near the battery, then to the light.
1 × EmberLux rigid LED strip light, 3M adhesive pre-applied, 2 × Mounting bolts (M4 × 25mm), 2 × Locking nuts, 1 × 3m cable with 5521 connector, 2 × Protective mounting cover caps.
Every Treklo light carries a 1 year warranty. If something's not right, get in touch and we'll sort it.
180°. A wide spread that fills the space instead of making a hot spot.
Lighting decides how your setup feels the moment the sun goes down. Good light makes packing up quicker, cooking easier and evenings at camp somewhere you actually want to sit. Every Treklo light is built to our own spec and tested as a finished light, so what you read on this page is what you get on your rig.
Pairs well with
Our commitment
At Campervan Builders, our commitment is simple: we only supply quality campervan, caravan, motorhome, and RV parts that we’ve personally tested in real off-grid conditions. From interior LED lighting to Starlink 12V conversion kits, every product is chosen for reliability, durability, and ease of installation. We back this with fast shipping Australia-wide, friendly support, and honest advice to help DIY builders and professionals alike. When you shop with us, you’re choosing proven gear that keeps you connected and comfortable on every adventure.
-
Tested for reliability
Everything we stock is tested in real Aussie off-grid conditions first.
-
Fast dispatch
Order before 3pm AEST for same-day shipping from Geelong, VIC.
-
Quality over price
We only stock products we'd use ourselves, even if they cost a bit more.