
Aluminium strength, a clear shield and three ways to mount it
A heavy-duty aluminium frame holds the Mini, and a clear shield protects it from dust, debris and impact while still letting the signal through. The open-air frame helps heat get away in hot climates.
Four custom-spec rubber-coated magnets give 100kg+ of combined pull (25kg+ each). Pull the magnets to bolt it flush, or use the supplied channel nuts and wing nuts on most aftermarket roof racks.
Online in three steps
Magnets need no tools. Rack or flush mounting takes basic tools. Install level 2 out of 10.
- 1
Pick your mount
Magnets, bolt-down or roof rack.
- 2
Secure the base
Drop channel nuts in the rack and tighten the wing nuts, or just place it on steel.
- 3
Fit the Mini
Shield on and you're done.
Built for life on the road
100kg+ magnet system
Four rubber-coated magnets, 25kg+ each.
Clear protective shield
RF-transparent, guards against dust, debris and impact.
Open-air frame
Better heat dissipation in harsh climates.
Roof rack hardware
Channel nuts, studs and wing nuts suit most aftermarket racks.
Anodized Aluminium
Long lasting UV protected coating that wont flake.
4 Bolt Install
Not a overcomplicated 20 bolts setup.
See it before you buy it
Plays a muted preview on its own. Tap for sound.
Swipe for more videos →
What's in the box
- ×1Starlink Mini Shielded Heavy-Duty Aluminium Magnet Mount
- ×1Roof rack mounting hardware
A flat steel surface, a roof rack, or a surface to bolt toNot included
Physical
- Frame
- Heavy-duty aluminium
- Shield
- Clear, RF-transparent
- Package
- 323 x 280 x 53mm
- Unit
- 315 x 275 x 60mm
- Weight
- 1.25 kg
Other
- Pull force
- 100kg+ combined (25kg+ each)
- Count
- 4, rubber-coated
- Options
- Magnet, flush bolt-down, roof rack
- Rack hardware
- Drop-in channel nuts with wing nuts
- Suits
- Starlink Mini
Warranty
- Warranty
- 1 year
Packed and dispatched from our Geelong workshop.
What owners say
Why we stock it
Why we rate this one
Our toughest magnet mount, with options for when magnets aren't enough.
It's built for 4WDs and touring rigs that cop constant vibration. A heavy-duty aluminium frame, a clear shield that's RF-transparent, and four custom-spec magnets pulling 100kg+ combined.
Three ways to mount it. Slap it on steel with the magnets, pull the magnets and bolt it flush, or use the supplied channel nuts and wing nuts on most aftermarket roof racks.
If your roof isnt magnetic, we offer 3M Adhesive Mounting Discs. (search the store "3M")
Know the limits. It's not lockable. If the Mini lives on the rack full time and security matters, step up to the Treklo XT Lockable Aluminium Mini Dish Mount. Want to pack it away mount-and-all? Our IP67 Tough Case for Shielded mounts is cut to fit it.
The Campervan Builders workshopGeelong, VIC
Real Setups
Frequently asked questions
- Fast Australian dispatch
- Field-tested for off-grid use
- Ships from Geelong

Yes. It's made for the Starlink Mini. It won't fit the larger Gen 3 dish.
Order before 3pm AEST for same day dispatch from Geelong. Free express shipping Australia wide on orders over $100. We also deliver to Aus Post parcel lockers and post offices.
Four rubber-coated magnets at 25kg+ each, 100kg of combined pull force.
*note: We could rate them higher if we used thicker steel to rate them, so dont be fooled by others.
Yes. Drop the supplied channel nuts into your rack channels, tighten the threaded studs, position the mount and secure it with the wing nuts. It suits most aftermarket roof racks.
Yes. Remove the magnets and bolt through the mounting holes into your roof or a flat surface.
No. It's clear and RF-transparent, so the signal passes through while the dish stays protected.
The open-air frame is designed to help heat get away in hot climates.
Yes. 100kg+ of combined magnet pull and it sticks like crazy. Bolt it to a roof rack if you want it there permanently.
They're rubber-coated to protect the mounting surface. So as long as your mounting surface is clean, you're good to go!
Yes. Our Weatherproof IP67 Tough Case for Shielded Magnet Mounts fits it with the Mini still attached.
1 year product manufacturing warranty, backed by us here in Geelong. If something goes wrong you're dealing with real people locally, not an overseas ticket queue.
Good Stuff to buy with it
Our commitment
At Campervan Builders, our commitment is simple: we only supply quality campervan, caravan, motorhome, and RV parts that we’ve personally tested in real off-grid conditions. From interior LED lighting to Starlink 12V conversion kits, every product is chosen for reliability, durability, and ease of installation. We back this with fast shipping Australia-wide, friendly support, and honest advice to help DIY builders and professionals alike. When you shop with us, you’re choosing proven gear that keeps you connected and comfortable on every adventure.
-
Tested for reliability
Everything we stock is tested in real Aussie off-grid conditions first.
-
Fast dispatch
Order before 3pm AEST for same-day shipping from Geelong, VIC.
-
Quality over price
We only stock products we'd use ourselves, even if they cost a bit more.



















